< Back
No items found.
No items found.

Light-Coated Free Standing Pipe Inspection

Uses axial scanning on free-standing pipes with none or light coatings (<3-4mm) for fast and accurate defect detection around the circumference of the pipe.
Videos
This is some text inside of a div block.
This is some text inside of a div block.
This is some text inside of a div block.

A single or double sensor is scanned axially on the pipe measuring attenuation and/or velocity changes in the signal due to corrosion, cracks or other defects around the circumference of the pipe. Ideal for quick inspections of exposed pipe at speeds up to 150mm/s (6in/s)

Features

  • Non-Contact EMAT technique.
  • Axial scanning with Lamb Waves provides circumferential inspection of the pipes at fast speed (20m/min).
  • Provides inspection on rough and corroded surfaces and when covered with thin wraps and coatings.
  • Permits inspection of pipes from 1” to 36” accessing only one point around the diameter of the pipe. Larger diameter pipes can be covered with multiple passes.
  • Available for pipes up to 1” in thickness.
  • Detects corrosion and pits as small as 1/10th of pipe thickness.

Software Upgrades

  • MRUT
  • MRUT Sizing


Related Instruments

The following instruments are recommended for this application.

SENSORS AND ACCESSORIES

Standard EMAT and DCUT Sensors and Accessories for the most common applications (normal beam, guided waves, angled beam)

VIEW
If you would like any more information on this system, please contact us, and one of our experts will be in touch.
CONTACT