No items found.
No items found.


BRIO is an advanced, ultra-portable Eddy Current Array (ECA) instrument designed for in-service inspections.

BRIO is an advanced, ultra-portable Eddy Current Array (ECA) instrument designed for in-service inspections in aerospace, oil & gas, power generation, and manufacturing industries.

Custom software tools and a comprehensive catalog of pencil, array, and rotating probes are available for conventional and advanced Eddy Current applications.

BRIO is small enough to be worn on a belt, and powerful enough for bench work. The tablet user interface connected wirelessly to the instrument permits the operator to be highly mobile when working at heights, climbing structures, or moving from part to part during benchtop inspection.

Intuitive BRIO software permits real-time control using the ruggedized tablet included with the instrument, or any wireless device or notebook computer running MS Windows®. The equipment is shipped ready-to-use with automatic tablet connectivity and probe recognition, pre-loaded configurations, and assisted probe calibration.

BRIO is available in two versions: BRIO and BRIO+ with ECA. Both versions support digital inputs and outputs for in-line integration in manufacturing environments.


  • Multi-channel, 4-frequency flaw detection from 10 Hz to 10 MHz.
  • 5-frequency, simultaneous conductivity and thickness measurement.
  • Supports Pencil, Conductivity, Thickness, Rotary, Array, and 3rd party probes.
  • Wireless communication between instrument and tablet or any Windows device.
  • Simple User Interface with assisted calibration, screen capture, photo management, and reporting tools.
  • Wi-Fi, Bluetooth, USB.
  • Up to 8 hours of battery life.


EC Specifications

Data Channels

BRIO: 4;

BRIO+: 16 (>16 with external MUX)

Coil Inputs


No. of Frequencies


Frequency Range

10 Hz - 10 MHz

Generator Output

16 Vpp

No. of Timeslots


Injection Modes

Simultaneous Injection, Multiplexed

Receiver Gain

0-90 dB; 0.1 increment

Sample Rate

10,000 Hz


Low Pass, High Pass, Rotary Speed Synchronization,

Encoder Noise

Conductivity Frequency

60 kHz, 120 kHz, 240 kHz, 480 kHz, 960 kHz

Conductivity Range


Conductivity Accuracy

±0.5% for 1-50%IACS

±1% for >50%IACS

Thickness Range

0-0.040" (0-1 mm)

Thickness Accuracy

±9.84e-5" (±2.5 μm)

Probe Modes

Absolute or Differential in either Bridge or Reflection (Transmit-Receive) Modes;

Conductivity or Thickness or Both

Environmental Specifications

Operating Temperature

32°F to 104°F (0°C to 40°C)

Storage Temperature

-4°F to 122°F (-20°C to 50°C)

Relative Humidity

80% non-condensing




IP65, MIL-STD-810G


CE, EN 61010-1:2010, EN 61326-1 (2013),

IEC 60068-2-1 and 2:2007, IEC 60068-2-6:2007

BRIO Specifications

Instrument Dimensions

4.4” x 5.2” x 2.3" (11.2 x 13.2 x 5.8 cm)

Weight (w/ battery)

1.54 lbs (700 g)


Li-Ion, Rechargeable Battery or 100-240 VAC, 50-60 Hz

Battery Life

Up to 8 hrs. per charge


Sealed, fanless


Wi-Fi 802.11ac, Bluetooth 4.0, USB 3.0, Gigabit Ethernet


Internal: 64 GB SSD

Expansion: micro SDXC


2 axes, quadrature or pulse


2 digital inputs

4 digital outputs + 2 analog outputs


Rectangular, Circular, Polar, Level, Conductivity, Thickness

Probe Recognition

Automatic (Innerspec probes)

Scanner Compatibility

Innerspec, Tecnatom, Olympus, Other


English, Spanish


  • Includes:
    - 90-degree pencil probe.
    - Calibration plates for conductivity and flaw detection.
    - Li-ion battery.
    - Belt with attached belt clip.
    - Hard-side protector case.
  • Additional probes, probe adapters, and accessories available.