SERVICES DE RECHERCHE ET DE CONSEIL EN CND

La recherche et le développement sont au cœur d'Innerspec Technologies. Notre entreprise investit près de 20 % de son chiffre d'affaires dans des activités de R&D, incluant le développement de nouveaux produits et technologies ainsi que l'amélioration de ceux existants. Cet engagement envers l'innovation a abouti à plus d'applications inédites que toute autre entreprise du secteur, nous conférant une position de leader dans le domaine du contrôle non destructif.

Innerspec est spécialisé dans les technologies EMAT, UT Phased Array, courants de Foucault, ainsi que la vision et la mesure laser appliquées aux processus industriels dans les secteurs de la métallurgie primaire, de la transformation des métaux, des tubes et tuyaux, du ferroviaire, du nucléaire et de l'aérospatiale.

Nos centres de R&D à Forest (Virginie, États-Unis) et à Madrid (Espagne) regroupent des chercheurs et des ingénieurs d'application diplômés en physique, science des matériaux, électronique, mécanique et informatique, forts de plus de 50 brevets et d'un long historique d'innovations réussies. Découvrez nos derniers travaux de R&D dans nos Articles et publications.

Innerspec USA participe fièrement au programme SBIR, tandis que notre filiale européenne est officiellement certifiée « PME innovante » par le ministère espagnol de l'Économie, de l'Industrie et de la Compétitivité.

Recherche et développement collaboratif en CND

Grâce à notre vaste expérience dans les projets collaboratifs européens, nous travaillons continuellement avec d'autres institutions pour commercialiser des développements innovants en CND.
Si vous avez une idée de projet, veuillez remplir notre formulaire de contact en ligne et nous évaluerons la meilleure façon de concrétiser votre développement CND sur mesure.

‍

Projets de recherche et développement CND réussis

REVERSIVE Project

The main objective of the REVERSIVE project is to develop adhesives capable of being peeled or re-peeled on demand, facilitating the disassembly of components for repair after manufacturing or disassembly at the end of their useful life.

ROLLECX Project

Inspection and evaluation of the structural integrity of rolling mill cylinders by combining non-invasive technologies”, ROLLECX, is a project funded by CDTI (Spain)

ISTAP Project

The overall objective of the ISTAP project is the design and development of a new dual system for the inspection and structural integrity assessment of petrochemical storage tank floors.

FACTORIA Project

The goal of the FactorIA project is to change the current manufacturing workflow from Technical Office–Operator–Production Means to a new paradigm: Technical Office–Production Means–Operator. In this new approach, production systems evolve to a conscious level, guiding operators only when their intervention is necessary.

ACTIVAL Project

Towards a more sustainable and competitive aviation by means of new active protection technologies for aluminum components and NDT-based monitoring and inspection solutions.

AUTOBOLT Project

AUTOmated load-measuring BOLT tightening tool. AUTOBOLT prevents cumbersome and heavy tool handling and allows for 10% accurate pre-tension. After an ultrasonic measurement, AUTOBOLT knows which specific bolt requires re-tightened.

AUTOSPOT Project

World first automated and contactless laser acoustics spot weld in-line inspection system. Its main goal is to develop a novel, non-destructive, and automated ultrasonic inspection system, for in-line detection and characterization of spot weld defects.

FUSION FUTURE Project

Investigates new materials, processes and advanced technologies to reach a sustainable Nuclear Fusion energy. This project has the general objective of investigating new materials, processes and advanced technologies that will contribute to solving the main critical aspects on the path to reach a sustainable Nuclear Fusion energy.

LOPEMAT Project

Development of low-power EMAT instrumentation for in-service corrosion inspection and monitoring in high temperature assets. Through the LOPEMAT project, Innerspec aims to develop and validate the first prototype of a of low-power EMAT system for normal beam and guided wave generation.

CORUS Project

Corrosion prediction and detection by ultrasonic testing in metallic tanks and piping filled with chemicals. Trough the CORUS project, Innerspec Technologies has developed a reliable method and the necessary tools for the detection, quantification and forecasting of wall-loss and corrosion in tank bottom floors and pipeline segment containing chemical products, without the need to empty the contents or decommission said assets.

AUTÉNTICO Project

Research and development in automatic characterization and classification technology using EMATs and clustering techniques. AUTÉNTICO’s objective is to develop a new range of EMAT transducers able to classify metallic materials in different families.

OPTIBLANKS Project

Through Optiblanks Project, Innerspec Technologies will overcome the limitations of automotive TWB manufacturing process weld quality control with a novel hybrid technology approach. This new inspection system will enable 100% inspection of laser welded parts to identify defects such as porosity, lack of penetration, lack of side wall fusion, etc...

SPMRail Project

Portable Residual Stress Measurement of Rail Wheels. Innerspec Technologies has developed the first, portable, battery-operated handheld instrument that can be used to provide rail-side inspections and facilitate operation in any environment. The instrument is coupled with a proprietary, patent-pending, dual-channel sensor that does not need to be rotated during inspection thus simplifying the operation, increasing the reliability and accuracy of results, and reducing complexity and inspection cycle time.